The John Deere L118 is a versatile lawn tractor designed for efficient and comfortable lawn care. Understanding its key features is crucial for maximizing its performance and longevity. This tractor boasts a powerful engine, typically a Briggs & Stratton or Kohler, designed for reliable power and efficient fuel consumption. The hydrostatic transmission provides smooth, responsive control, allowing for precise maneuvering around obstacles and varying terrain. Familiarizing yourself with the location and function of the engine, transmission, and other vital components, such as the battery, air filter, and fuel filter, will greatly assist in routine maintenance and troubleshooting. Taking the time to learn the function of each component will allow you to better recognize when a particular part is not functioning properly.
Beyond the engine and transmission, the L118's mowing deck is a critical component to understand. It is usually a 42-inch or 48-inch deck, designed for efficient grass cutting. The deck height is adjustable, allowing you to customize the cut to your preferred lawn height. Proper leveling and blade maintenance are essential for achieving a clean, even cut and preventing damage to the deck itself. Check your manual for specific procedures on removing the deck, sharpening the blades, and leveling the deck. Regular inspections are key to preventing damage and ensuring optimal performance. By understanding the interaction of the blades, belts and pulleys, you can troubleshoot any issues that arise.
Finally, the operator's station is designed for comfort and ease of use. It typically includes an adjustable seat, ergonomic steering wheel, and conveniently located controls. Understanding the location and function of all controls, including the throttle, brake, PTO engagement, and deck height adjustment, is essential for safe and efficient operation. The control panel also provides valuable information about the tractor's status, such as battery voltage and engine temperature. Ensure you familiarize yourself with the location and proper usage of each control to prevent any accidental damage or improper use.
Operating any piece of machinery, including the John Deere L118, requires strict adherence to safety precautions. Before starting the engine, always inspect the surrounding area for obstacles, pets, or children. Ensure that all safety guards and shields are in place and functioning correctly. Never operate the tractor under the influence of alcohol or drugs. Taking these precautions will create a safe operating environment for you and everyone around you.
During operation, always wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, and sturdy footwear. Avoid loose clothing that could become entangled in moving parts. Be particularly cautious when operating on slopes or uneven terrain, as this can increase the risk of tipping. Always drive at a safe speed and be aware of your surroundings. Remember to always read the warnings in your operator's manual and understand the safe operation practices.
After operation, allow the engine to cool completely before refueling. Always refuel in a well-ventilated area away from open flames or sparks. When performing maintenance, disconnect the spark plug wire to prevent accidental starting. Never work on the tractor while the engine is running. Proper maintenance and storage practices can significantly reduce the risk of accidents and prolong the life of your tractor. Following these simple precautions will ensure that your tractor will give you many years of service.
Knowing the specifications and capabilities of your John Deere L118 is vital for proper operation and maintenance. The engine horsepower rating, typically ranging from 17 to 19 horsepower, dictates the tractor's ability to handle various mowing tasks. Understand your tractor's maximum cutting width, typically 42 to 48 inches, to efficiently cover your lawn. Knowing the fuel tank capacity will help you plan your mowing sessions effectively. Being familiar with the exact measurements of your tractor will help with proper storage, so take the time to measure the length, width, and height of your machine.
The tractor's hydrostatic transmission allows for variable speed control, typically ranging from 0 to 5.5 mph forward and 0 to 3 mph reverse. This allows for precise maneuvering and efficient operation on various terrain. The turning radius is also a critical specification to consider, as it determines the tractor's maneuverability in tight spaces. Consult your owner’s manual for detailed specifications specific to your model year, including dimensions, weight, and tire pressure recommendations. This information is essential for safe and efficient operation. These specifications should be reviewed regularly.
Understanding the tractor's weight capacity is important if you plan to use attachments or tow trailers. Never exceed the specified weight limit, as this can damage the tractor and create a safety hazard. Familiarize yourself with the recommended tire pressure for optimal performance and handling. Proper tire pressure ensures even weight distribution and reduces the risk of tire damage. These specifications are not just numbers, they represent the limitations of your equipment and should always be adhered to. Maintaining awareness of these specifications is crucial for safe, efficient, and long-lasting tractor performance.
Regular engine oil changes are critical for the longevity and performance of your John Deere L118. The engine oil lubricates the internal components, reducing friction and wear. Over time, the oil degrades due to heat, contaminants, and use, losing its ability to protect the engine effectively. Failing to change the oil at the recommended intervals can lead to increased friction, overheating, and eventually, engine failure. Refer to your operator's manual for the specific oil type and change intervals recommended for your machine, typically based on operating hours or calendar months. Always use a high-quality oil filter along with the oil to ensure proper filtration of contaminants.
The oil change process itself is straightforward. First, warm up the engine for a few minutes to help the oil flow more easily. Locate the oil drain plug underneath the engine and position a suitable container underneath to catch the used oil. Carefully remove the drain plug, allowing the oil to drain completely. Once drained, replace the drain plug with a new or properly sealed plug. Then, remove the old oil filter and install a new one, lightly lubricating the filter gasket with fresh oil. Finally, refill the engine with the correct amount of oil as specified in your manual, check the oil level using the dipstick, and start the engine to check for leaks.
The air filter prevents dirt and debris from entering the engine, ensuring clean combustion and optimal performance. A dirty air filter restricts airflow, reducing engine power and fuel efficiency. Over time, a clogged air filter can also lead to engine damage due to increased wear from abrasive particles entering the cylinders. Regular cleaning and replacement of the air filter is therefore essential for maintaining the health and efficiency of your John Deere L118.
To clean the air filter, carefully remove it from its housing. Tap the filter gently on a hard surface to dislodge loose dirt and debris. You can also use compressed air to blow out the filter from the inside out. However, be careful not to use excessive air pressure, as this can damage the filter element. For more thorough cleaning, you can wash the filter with mild soap and water, allowing it to dry completely before reinstalling. Replace the air filter when it is excessively dirty or damaged, following the recommendations in your operator's manual for replacement intervals.
The spark plug ignites the air-fuel mixture in the engine cylinder, initiating the combustion process. Over time, spark plugs can become fouled with carbon deposits, worn electrodes, or damaged insulators. These conditions can lead to misfires, reduced engine power, and increased fuel consumption. Regular inspection, cleaning, and replacement of the spark plug are crucial for maintaining optimal engine performance and fuel efficiency in your John Deere L118.
To inspect the spark plug, carefully remove it from the engine using a spark plug wrench. Examine the electrode for wear, damage, or excessive carbon buildup. Clean the spark plug with a wire brush or spark plug cleaner to remove any deposits. Check the spark plug gap using a feeler gauge and adjust it to the specification in your operator's manual. If the spark plug is severely worn or damaged, replace it with a new one of the correct type. When installing the spark plug, tighten it to the specified torque to ensure a proper seal and prevent damage to the cylinder head.
Maintaining a clean and properly functioning fuel system is vital for the performance and reliability of your John Deere L118. The fuel system delivers fuel to the engine for combustion. Contaminants like dirt, water, and debris can clog fuel lines, filters, and carburetors, leading to poor engine performance, stalling, or even engine damage. Regular fuel system maintenance includes using fresh, clean fuel, adding fuel stabilizer, and cleaning or replacing fuel filters.
Always use fresh, clean gasoline with the octane rating recommended in your operator's manual. Store gasoline in a clean, sealed container and avoid using gasoline that has been stored for extended periods. Add fuel stabilizer to the fuel tank, especially when storing the tractor for the off-season. The fuel stabilizer helps prevent the fuel from deteriorating and forming deposits in the fuel system. Regularly inspect the fuel filter and replace it when it is dirty or clogged, following the recommendations in your operator's manual.
The battery provides the electrical power needed to start the engine and operate electrical components. Proper battery maintenance is essential for ensuring reliable starting and extended battery life. Over time, battery terminals can corrode, and the battery can lose its charge due to inactivity or cold weather. Regular battery maintenance includes cleaning the terminals, checking the electrolyte level (if applicable), and charging the battery when necessary.
To clean the battery terminals, disconnect the battery cables and use a wire brush or terminal cleaner to remove corrosion. Apply a thin coating of petroleum jelly or battery terminal protector to prevent future corrosion. Check the electrolyte level in each cell of the battery (if applicable) and add distilled water as needed to maintain the proper level. Use a battery charger to charge the battery when it is low or after periods of inactivity. Always follow the charger manufacturer's instructions and avoid overcharging the battery.
Sharp mower blades are essential for achieving a clean and even cut. Dull or damaged blades tear the grass, leaving ragged edges that can make the lawn susceptible to disease and pests. Regularly sharpening and balancing the mower blades will not only improve the quality of the cut but also reduce stress on the engine and mower deck components. This extends the life of your mower and helps to maintain a healthy lawn.
Before sharpening the blades, disconnect the spark plug wire to prevent accidental starting. Carefully remove the blades from the mower deck and inspect them for damage. Sharpen the blades using a file, grinder, or blade sharpening tool, following the original cutting angle. After sharpening, balance the blades using a blade balancer. An unbalanced blade can cause excessive vibration and damage to the mower deck. If the blades are severely damaged or unbalanced, replace them with new ones.
The belts transfer power from the engine to various components, such as the mower deck and transmission. Over time, belts can wear, crack, or stretch, leading to reduced performance or even failure. Regular inspection and replacement of belts are essential for maintaining proper operation of your John Deere L118. Ignoring worn belts can lead to further damage to pulleys, bearings, and other components, resulting in costly repairs.
Visually inspect the belts for cracks, fraying, glazing, or excessive wear. Check the belt tension and adjust it if necessary, following the specifications in your operator's manual. Replace belts that are worn, damaged, or stretched. When replacing a belt, make sure to use the correct belt size and type. Follow the belt routing diagram to ensure that the belt is properly installed. Properly tensioned and installed belts will provide optimal performance and longevity.
Proper tire pressure is crucial for safe operation, optimal traction, and even cutting. Underinflated tires can reduce maneuverability, increase fuel consumption, and cause premature tire wear. Overinflated tires can reduce traction and make the ride uncomfortable. Regularly checking and maintaining the correct tire pressure will ensure optimal performance and longevity of your tires.
Use a tire pressure gauge to check the tire pressure regularly. Inflate or deflate the tires to the recommended pressure specified in your operator's manual or on the tire sidewall. Inspect the tires for cuts, bulges, or other damage. Replace tires that are worn or damaged. Also, check the tire tread depth and replace tires that have insufficient tread for proper traction. Regularly rotate tires, if possible, to ensure even wear and extend their lifespan.
Encountering engine starting problems with your John Deere L118 can be frustrating, but often the solution is simpler than you think. Begin by checking the basics: ensure the fuel tank has sufficient gasoline and that the fuel is fresh. Old or stale fuel can prevent the engine from starting or cause it to run poorly. Next, inspect the spark plug for cleanliness and proper gap; a fouled or incorrectly gapped spark plug can be a common culprit. Finally, examine the battery connections for corrosion or looseness; a weak or improperly connected battery won't provide the necessary power to start the engine.
If the initial checks don't resolve the issue, delve deeper into the starting system. Verify the proper functioning of the safety switches located on the seat, brake pedal, and mower deck engagement lever; these switches are designed to prevent starting unless they are properly engaged. Check the starter solenoid for proper operation; a faulty solenoid can prevent the starter motor from engaging. In addition, inspect the wiring harness for any signs of damage or loose connections, as a break in the circuit can disrupt the starting process. Carefully test each component before attempting more advanced repairs.
Mower deck problems can range from uneven cutting to complete failure to engage. Start by visually inspecting the mower blades for sharpness, damage, or excessive wear; dull or damaged blades will result in a poor cut and can even damage the deck. Ensure the blades are securely fastened and balanced properly, as imbalance can cause excessive vibration and stress on the spindle bearings. Check the deck for any obstructions, such as debris or accumulated grass clippings, which can interfere with blade rotation and airflow.
If the blades appear to be in good condition, investigate the belt system that drives the mower deck. Examine the drive belt for signs of wear, cracking, or slippage; a worn or slipping belt will reduce cutting power and may eventually break. Ensure the belt is properly tensioned and routed correctly around the pulleys; incorrect tension or routing can cause premature wear and reduced performance. Check the spindle bearings for excessive play or noise; worn spindle bearings can cause vibration, overheating, and eventual failure of the spindle assembly.
Transmission issues can manifest as difficulty shifting gears, loss of power, or unusual noises emanating from the transmission area. Begin by checking the transmission fluid level, ensuring it is within the recommended range; low fluid levels can cause slippage and damage to internal components. Inspect the shift linkage for any binding or looseness; a misaligned or worn shift linkage can make it difficult to engage gears smoothly. Also, make sure that any hydrostatic transmission has had its scheduled service based on the equipment's use. Neglecting this maintenance will affect performance.
If fluid levels and linkage appear to be in order, consider the possibility of internal transmission damage. Listen for unusual grinding or whining noises while shifting or operating the tractor; these noises can indicate worn gears or bearings. If the tractor is equipped with a hydrostatic transmission, check for signs of fluid leakage or cavitation; leaks can indicate damaged seals, while cavitation can indicate low fluid levels or a faulty pump. Consult a qualified mechanic for diagnosis and repair of internal transmission problems.
Electrical issues can range from non-functioning lights to a complete loss of power. Start by checking the fuses and circuit breakers; a blown fuse or tripped breaker is often the first indication of an electrical problem. Replace any blown fuses with the correct amperage rating, and reset any tripped breakers. Inspect the wiring harness for any signs of damage, such as frayed wires, corroded connectors, or loose connections; these problems can cause shorts or open circuits, disrupting electrical flow. Ensure all ground connections are clean and secure, as poor grounding can cause a variety of electrical problems.
If the fuses and wiring appear to be in good condition, investigate the individual components of the electrical system. Test the battery voltage to ensure it is within the recommended range; a low battery voltage can indicate a failing battery or a problem with the charging system. Check the alternator or charging system output to ensure it is properly charging the battery; a faulty alternator can cause the battery to discharge, leading to starting problems. Inspect the light bulbs and switches for proper operation; a burned-out bulb or a faulty switch can prevent the lights from working.
Unusual noises are often the first sign of a potential problem with your John Deere L118. Listen carefully to the type of noise, its location, and when it occurs; these details can provide valuable clues about the source of the problem. A squealing noise from the mower deck may indicate a worn belt or a problem with the spindle bearings. A grinding noise from the engine compartment could indicate a problem with the starter motor or the flywheel.
A knocking noise from the engine may indicate worn connecting rod bearings or piston slap. A hissing noise from the cooling system could indicate a leak. Also, be aware that it is important to service your equipment regularly according to the equipment's service manual. Neglecting to do so will usually result in unnecessary downtime and the potential for premature failure. Consult a qualified mechanic for diagnosis and repair of unusual noises, especially if the source is not immediately apparent or if the noise is accompanied by other symptoms, such as loss of power or overheating.
The belts and blades on your John Deere L118 are critical components for optimal mowing performance. Over time, these parts can wear down, become damaged, or even break. Regularly inspecting your belts and blades is essential. Look for signs of wear such as fraying, cracking, glazing, or uneven wear on the belts, and dullness, bending, or cracks on the blades. Timely replacement of these parts will not only ensure a clean and efficient cut but also prevent further damage to other components of your tractor.
Replacing the belts on your L118 usually involves removing belt guards, routing the new belt correctly (referring to your tractor's belt routing diagram located on the frame or in this manual), and ensuring proper tension. When replacing the blades, always disconnect the spark plug wire to prevent accidental starting. Use a blade removal tool and a torque wrench to ensure the blades are securely fastened to the mower deck. Remember to balance the blades before installation to minimize vibration and ensure a smooth cut. A balanced blade will last longer and reduce stress on the spindle bearings.
The carburetor is a vital part of your L118's engine, responsible for mixing air and fuel in the correct proportions for combustion. If your tractor is experiencing difficulty starting, rough idling, or poor performance, the carburetor might be the culprit. Common carburetor issues include clogs from old fuel, vacuum leaks, or a malfunctioning float. Cleaning the carburetor is a relatively simple task, but requires careful attention to detail.
Before disassembling the carburetor, take photos of the assembly to ensure correct reassembly. Use carburetor cleaner to remove deposits from the jets and passages. Replace any worn or damaged gaskets and O-rings. When reassembling the carburetor, ensure all parts are properly tightened and adjusted according to the manufacturer's specifications. If the carburetor is severely damaged or cannot be effectively cleaned, replacement may be the best option. Adjusting the idle and mixture screws after reassembly is crucial for optimal engine performance.
The mower deck on your John Deere L118 endures a lot of wear and tear, especially if you mow over rough terrain or objects. Dents, cracks, rust, and damaged spindles are common problems that can affect the deck's performance. Regular inspection and maintenance are essential for extending the life of your mower deck. Clean the underside of the deck after each use to prevent grass buildup, which can trap moisture and lead to rust.
Repairing the mower deck may involve welding cracks, replacing damaged spindles, or straightening bent metal. Before welding, be sure to clean the area thoroughly and use appropriate safety equipment. When replacing spindles, ensure they are properly aligned and torqued to the correct specifications. If the deck is severely rusted or damaged beyond repair, replacing the entire deck might be the most practical solution. Remember to grease the spindle bearings regularly to ensure smooth operation and prevent premature failure. Inspect the deck for any loose hardware and tighten as needed.
A healthy battery is essential for reliable starting of your John Deere L118. Over time, batteries lose their ability to hold a charge, especially in extreme temperatures. Symptoms of a weak battery include slow engine cranking, difficulty starting, or a battery that requires frequent charging. Before replacing the battery, ensure that the charging system is functioning correctly to prevent premature failure of the new battery.
When replacing the battery, always disconnect the negative terminal first, followed by the positive terminal. Clean the battery terminals with a wire brush to remove any corrosion. Install the new battery, connecting the positive terminal first, followed by the negative terminal. Secure the battery with the hold-down strap or clamp. Ensure the battery terminals are properly tightened to prevent loose connections, which can cause starting problems and damage to the electrical system. Consider using a battery maintainer during periods of inactivity to extend the life of your battery.
The electrical system on your John Deere L118 is responsible for starting, lighting, and other essential functions. Common electrical problems include blown fuses, loose connections, and faulty switches. Before attempting any electrical repairs, disconnect the negative battery terminal to prevent short circuits. Always consult your tractor's wiring diagram to ensure proper connections.
Start by checking the fuses for any breaks or damage. Replace any blown fuses with fuses of the same amperage rating. Inspect the wiring harness for any signs of damage, such as frayed wires or loose connections. Clean and tighten any loose connections. If you suspect a faulty switch, use a multimeter to test its continuity. Replace any faulty switches with new ones. Ensure all wiring is properly routed and secured to prevent chafing or damage. Remember to always prioritize safety when working with electrical systems.
Proper storage is crucial to ensure your John Deere L118 is ready to go when spring arrives. Neglecting storage procedures can lead to a multitude of problems, ranging from a dead battery to corroded engine components. Before storing your tractor, give it a thorough cleaning. Remove any accumulated dirt, grass clippings, or debris from the engine compartment, mower deck, and other areas. A clean machine is less susceptible to corrosion and makes it easier to spot potential problems when you take it out of storage. After cleaning, perform any necessary maintenance tasks, such as changing the oil and filter. This allows fresh oil to coat the engine's internal components during storage, providing added protection against rust and corrosion.
Inspect the tires for wear and tear and inflate them to the recommended pressure. Check your owner's manual for the correct tire pressure specifications. Proper tire pressure prevents flat spots from forming during long periods of inactivity. If possible, consider placing the tractor on blocks to take the weight off the tires entirely. This further minimizes the risk of tire damage and helps to maintain their shape. Finally, lubricate all grease fittings on the tractor, including those on the steering linkage, mower deck spindles, and other moving parts. Fresh grease will prevent corrosion and ensure smooth operation when you start using the tractor again.
Fuel stabilization is a critical step in the winterization process. Gasoline can degrade over time, forming varnish and gum deposits that can clog fuel lines and carburetors. To prevent this, add a fuel stabilizer to the fuel tank according to the manufacturer's instructions. Run the engine for a few minutes after adding the stabilizer to ensure that it circulates throughout the fuel system. This will protect the entire fuel system from degradation during storage. Using fuel stabilizer prevents costly repairs to the engine later.
Consider filling the fuel tank completely before storing the tractor. A full tank reduces the amount of air space inside, minimizing the formation of condensation. Condensation can lead to rust and corrosion in the fuel tank and fuel system. If filling the tank isn't possible, ensure that you leave minimal empty space to limit the chance of condensation. Always use fresh fuel and a reputable fuel stabilizer product for optimal results.
The battery is one of the most vulnerable components during storage. Cold temperatures and inactivity can cause the battery to discharge and potentially freeze, leading to permanent damage. Remove the battery from the tractor and store it in a cool, dry place where it won't be exposed to extreme temperatures. A garage or basement is often a suitable location. Clean the battery terminals with a wire brush to remove any corrosion. Corrosion can impede electrical flow and prevent the battery from charging properly. Before storing the battery, fully charge it using a battery charger.
Periodically check the battery's charge level during storage and recharge it as needed. A battery maintainer, also known as a trickle charger, can be used to automatically keep the battery at its optimal charge level. This prevents the battery from discharging completely and extends its lifespan. If you don't have a battery maintainer, check the voltage every few weeks and recharge the battery when it drops below 12.4 volts. Proper battery maintenance during storage will ensure that your tractor starts reliably when you need it.
Protecting your tractor from corrosion is vital to preserving its condition during storage. After cleaning and lubricating the tractor, consider applying a protective coating to exposed metal surfaces. A light coat of oil or a rust inhibitor spray can help to prevent rust formation. Pay particular attention to areas that are prone to corrosion, such as the mower deck, engine components, and exposed metal fasteners. Store the tractor in a dry, well-ventilated location. Moisture is a major contributor to corrosion, so avoiding damp environments is crucial.
If possible, cover the tractor with a breathable cover. This will protect it from dust, dirt, and moisture while allowing air to circulate. Avoid using plastic tarps, as they can trap moisture and promote corrosion. Regularly inspect the tractor during storage for any signs of rust or corrosion. If you spot any, address it immediately by cleaning the affected area and applying a rust inhibitor. Taking these precautions will help to keep your John Deere L118 in excellent condition for many years to come.
Maintaining your John Deere L118 lawn tractor requires using the correct replacement parts to ensure optimal performance and longevity. Using generic or incorrect parts can lead to premature wear, reduced efficiency, and potentially damage other components of your machine. Always refer to the parts catalog specific to your L118 model. This catalog provides detailed diagrams and part numbers, making it easy to identify exactly what you need. Cross-referencing the part number with your local John Deere dealer or an authorized online retailer is crucial to confirm compatibility. Remember, a seemingly similar part might have subtle differences that significantly impact its function in your specific model. If you are unsure about a particular part, consult with a qualified John Deere technician to avoid costly mistakes and ensure your L118 continues to operate smoothly.
The John Deere parts catalog is available both in print and online. The online version is often searchable by model number, component, or even keywords describing the part. This allows for quick identification and ordering. When ordering, always verify the quantity needed and any specific characteristics such as thread size, length, or material. Some parts might have been superseded by newer versions, so the dealer or online retailer can provide the latest equivalent part number. Keeping accurate records of the parts you've replaced, including the date and part number, can also be helpful for future maintenance and repairs. Don't underestimate the importance of using genuine John Deere parts, even for seemingly minor components, as they are specifically engineered to meet the stringent standards of your L118.
Enhance the versatility and performance of your John Deere L118 with a range of recommended accessories. A popular addition is a mulch kit, which allows you to finely chop grass clippings and return them to the lawn as a natural fertilizer, promoting a healthier and greener lawn. Consider a rear bagger attachment for efficiently collecting grass clippings and leaves, leaving your lawn clean and tidy, especially useful during the fall season. For those who need to haul materials, a utility cart or trailer can be connected to the L118, making it easier to transport mulch, soil, or other garden supplies. Remember to check the weight capacity of the cart and the L118's towing capacity before loading it.
To improve operator comfort and safety, consider adding features like a sun canopy to provide shade on hot days or a headlight kit for enhanced visibility during evening or early morning operation. Tire chains can provide increased traction in snowy or icy conditions, allowing you to use your L118 for snow removal with a front-mounted blade. Always follow the manufacturer's instructions for installing and using any accessory, and ensure it is compatible with your specific L118 model year. Regular maintenance of accessories, such as cleaning the bagger or lubricating the cart's wheels, will extend their lifespan and ensure they continue to function properly. Proper storage of accessories during the off-season will also protect them from the elements and prevent damage.
The most reliable source for purchasing genuine John Deere parts and accessories is your local authorized John Deere dealer. Dealers have trained parts specialists who can help you identify the correct parts for your L118 and answer any questions you may have. They also have access to the most up-to-date parts catalogs and technical information. Dealers often offer installation services for accessories and can provide guidance on proper maintenance procedures. Building a relationship with your local dealer can be beneficial for ongoing support and advice related to your L118.
Alternatively, many authorized online retailers sell genuine John Deere parts and accessories. Ensure that the online retailer is indeed authorized to sell John Deere products to avoid purchasing counterfeit or substandard parts. Check for customer reviews and ratings to assess the retailer's reputation for quality and service. Before placing an order online, carefully review the product description, part number, and compatibility information to ensure it matches your L118 model. Consider the shipping costs and return policies of the online retailer before making a purchase. Comparison shop between different online retailers to find the best price and availability. Whether you choose to purchase from a dealer or an online retailer, prioritize genuine John Deere parts to maintain the performance and reliability of your L118.