A consistent maintenance schedule is crucial for ensuring the longevity and optimal performance of your John Deere Z355E mower. Neglecting routine maintenance can lead to costly repairs down the line and significantly reduce the lifespan of your machine. Adhering to a schedule allows you to catch potential problems early, preventing them from escalating into major issues. Consult your mower's operator's manual for specific intervals, but generally, regular checks should include inspecting fluid levels, lubricating moving parts, and verifying the condition of belts and hoses. A well-maintained mower will not only perform better but also provide a safer and more enjoyable mowing experience.
Establish a routine based on hours of use or calendar time, whichever comes first. For example, you might check the oil level before each use and perform a full service every 50 hours. Keep a log of all maintenance performed, noting the date, hours of use, and any specific tasks completed. This record will be invaluable for tracking the overall health of your mower and identifying any recurring issues. This proactive approach to maintenance will save you time and money in the long run.
Changing the oil and filter is arguably the most important maintenance task you can perform on your Z355E mower. The oil lubricates the engine's internal components, reducing friction and preventing wear. Over time, oil breaks down and becomes contaminated with dirt and debris, losing its ability to effectively protect the engine. The oil filter removes these contaminants from the oil, ensuring that clean oil continues to circulate. Failing to change the oil and filter regularly can lead to engine damage and eventual failure.
Before starting, ensure the engine is cool to avoid burns. Gather the necessary supplies: new oil filter, recommended type and quantity of oil, wrench, drain pan, and rags. Carefully remove the old oil filter and install the new one, tightening it according to the manufacturer's instructions. Locate the oil drain plug, remove it, and allow the old oil to drain completely into the drain pan. Replace the drain plug, then add the new oil to the crankcase, referring to your operator's manual for the correct amount. Start the engine and let it run for a few minutes, then check the oil level and add more if necessary. Properly dispose of the used oil and filter at a recycling center.
A clean mower deck is essential for maintaining optimal cutting performance and preventing rust and corrosion. Grass clippings and debris can accumulate under the deck, trapping moisture and creating a breeding ground for rust. This buildup can also interfere with the airflow around the blades, reducing cutting efficiency and leaving clumps of grass. Regular cleaning helps prevent these issues and ensures a clean, even cut every time.
After each use, remove any large clumps of grass from the deck with a scraper or brush. Periodically, raise the mower deck (following safety precautions and disconnecting the spark plug) and thoroughly clean the underside of the deck with a pressure washer or garden hose. Be sure to remove all traces of grass and debris. Allow the deck to dry completely before applying a coat of rust-inhibiting paint to protect the metal. A clean deck not only improves cutting performance but also extends the life of your mower.
Dull mower blades tear grass rather than cut it cleanly, resulting in a ragged, uneven cut and stressing the turf. Sharp blades, on the other hand, produce a clean cut, promoting healthy grass growth and improving the overall appearance of your lawn. Regularly inspecting your blades for sharpness and damage is crucial for maintaining a well-manicured lawn. If the blades are dull, they should be sharpened or replaced.
Before sharpening or replacing blades, disconnect the spark plug wire to prevent accidental starting. Carefully remove the blades from the mower deck, noting the direction they were installed. Use a file or grinder to sharpen the blades, maintaining the original cutting angle. Be sure to balance the blades after sharpening to prevent vibration. If the blades are severely damaged or worn, replace them with new ones. When reinstalling the blades, ensure they are properly aligned and tightened to the correct torque specification. Sharp blades are essential for a healthy and beautiful lawn.
The air filter protects the engine from harmful dirt and debris that can cause wear and damage. A clogged air filter restricts airflow to the engine, reducing performance and fuel efficiency. Regularly inspecting and cleaning or replacing the air filter is essential for maintaining optimal engine performance and preventing costly repairs. A clean air filter allows the engine to breathe freely, resulting in smoother operation and longer engine life.
Locate the air filter housing on your Z355E mower. Remove the cover and inspect the air filter for dirt and debris. If the filter is only lightly soiled, you can clean it by gently tapping it on a hard surface or using compressed air. If the filter is heavily soiled or damaged, it should be replaced with a new one. When reinstalling the filter, ensure it is properly seated and the housing is securely closed. Refer to your operator's manual for the recommended type and frequency of air filter maintenance.
The spark plug ignites the air-fuel mixture in the engine cylinder, initiating the combustion process. A faulty spark plug can cause difficult starting, poor engine performance, and reduced fuel efficiency. Regularly inspecting the spark plug for wear and carbon buildup is crucial for maintaining optimal engine performance. If the spark plug is fouled or damaged, it should be replaced.
Before removing the spark plug, allow the engine to cool completely. Disconnect the spark plug wire and use a spark plug wrench to remove the plug. Inspect the spark plug for signs of wear, such as a cracked insulator or worn electrodes. Clean the spark plug with a wire brush or replace it with a new one. When installing a new spark plug, ensure it is properly gapped according to the manufacturer's specifications. Tighten the spark plug to the correct torque specification to prevent damage to the cylinder head. A properly functioning spark plug is essential for reliable engine performance.
If your John Deere Z355E refuses to start, several factors could be the culprit. Begin by verifying the fuel level in the tank and ensuring it's of the correct octane rating. Check the spark plug(s) for fouling or damage; a worn or dirty spark plug can prevent ignition. Make sure the battery has a sufficient charge and that the connections are clean and tight. A weak battery or corroded terminals can hinder the starter motor's ability to crank the engine effectively. Also, check the safety interlock switches. These switches, typically located on the seat, brake pedal, and PTO lever, prevent the engine from starting if they are not engaged. A faulty switch can falsely signal that the operator is not in the correct position, preventing the engine from turning over.
Further investigation into engine starting problems might require examining the starter motor itself. Use a multimeter to test if the starter solenoid is receiving power when the key is in the start position. If power is present, the starter motor may be defective and require replacement. Check the flywheel for damage or debris that could impede its rotation. Look at the carburetor or fuel injection system, especially if the mower has been sitting unused for an extended period. Stale fuel can clog the carburetor jets or fuel injectors, preventing the engine from receiving the necessary fuel to start. A carburetor cleaning or fuel injector service might be necessary.
A decline in cutting performance on your John Deere Z355E is often an indication of dull or damaged blades. Sharpen your blades regularly and replace them when they show signs of significant wear or damage, such as cracks or bends. Ensure that the blades are correctly installed, facing the correct direction. Incorrect blade installation will result in inefficient cutting and potential damage to the mower deck. Inspect the mower deck for obstructions, such as accumulated grass clippings or debris, which can impede airflow and reduce cutting efficiency. Periodically clean the deck to maintain optimal performance.
Beyond the blades, the mower deck's condition itself can affect cutting performance. Ensure that the deck is level and properly adjusted according to the manufacturer's specifications. An unlevel deck will result in an uneven cut. The mower deck belt should also be examined for wear, fraying, or damage. A slipping belt will reduce the blades' rotational speed, leading to poor cutting. Finally, consider the engine's performance. A weak engine may not provide sufficient power to the blades, particularly when cutting thick or dense grass. Consult a qualified mechanic to diagnose and address any underlying engine issues.
Unusual noises or vibrations emanating from your John Deere Z355E should never be ignored. These symptoms often signal underlying mechanical problems that can worsen if left unaddressed. If you hear squealing noises, especially during engagement of the blades, it is very likely caused by the belt. A worn or loose belt often causes these noises and replacing the belt will solve the issue. Be aware of rattling or knocking sounds, which could suggest loose components or engine issues. Immediately stop the mower and inspect for loose bolts, shields, or other hardware. Internal engine knocking requires immediate professional diagnosis.
Excessive vibrations can indicate problems with the blades, spindles, or other rotating components. Check the blades for balance and ensure that they are securely fastened to the spindles. A bent blade can cause significant vibrations and must be replaced immediately. Also, check the spindles themselves for play or damage. Worn spindle bearings can cause vibrations and should be replaced to prevent further damage. In some cases, the vibration could be caused by an unbalanced engine. An engine that is not running smoothly can transmit vibrations through the entire machine. This issue should be addressed by a qualified mechanic.
Battery problems can be a common cause of starting difficulties, especially after periods of inactivity. The first step is always to visually inspect the battery terminals for corrosion. Clean any corrosion with a mixture of baking soda and water, ensuring you disconnect the battery cables before cleaning. After cleaning, apply a thin coat of dielectric grease to prevent future corrosion. Check the battery's charge level using a multimeter. A fully charged 12-volt battery should read around 12.6 volts. If the voltage is significantly lower, try charging the battery using a battery charger. If the battery fails to hold a charge after charging, it may need to be replaced.
The charging system of the John Deere Z355E needs to be working correctly to maintain battery health. The charging system provides power to the electrical components when the engine is running. With the engine running, use a multimeter to check the voltage at the battery terminals. The voltage should be higher than 12.6 volts, ideally between 13.5 and 14.5 volts. A charging voltage that is too high or too low can damage the battery. A faulty voltage regulator is typically the reason the voltage levels are incorrect. A faulty regulator or alternator can prevent the battery from charging properly.
The fuel system is essential for delivering fuel to the engine. Issues within this system can lead to starting problems, poor performance, or stalling. Start by checking the fuel filter for clogs or restrictions. A clogged filter can restrict fuel flow, preventing the engine from receiving the necessary fuel. Replace the fuel filter regularly as part of your routine maintenance. Examine the fuel lines for cracks, leaks, or kinks that could impede fuel flow. Replace any damaged fuel lines to prevent fuel leaks and ensure proper fuel delivery.
The carburetor or fuel injection system, depending on your model, needs to be working correctly. Clean the carburetor to remove any debris or varnish that may have accumulated. Carburetor cleaner can be used to dissolve these deposits. For fuel-injected models, have the injectors professionally cleaned or replaced if necessary. Furthermore, ensure the fuel cap is venting properly. A non-venting fuel cap can create a vacuum in the fuel tank, preventing fuel from flowing to the engine. Loosen the fuel cap to see if it resolves the issue; if it does, replace the fuel cap with a new one.
Operating any piece of machinery, especially a John Deere Z355E zero-turn mower, requires a deep understanding of safety principles. Always prioritize your personal safety and the safety of those around you. Before operating the mower, thoroughly read and understand this entire manual. Familiarize yourself with all controls, indicators, and safety labels on the machine. Ignoring safety warnings can lead to serious injury or even death; therefore, attentiveness and adherence to the following guidelines are paramount for a safe mowing experience.
Never allow children or untrained individuals to operate the mower. This includes ensuring they are kept a safe distance away during operation and maintenance. Secure the area before starting the engine, removing any toys, rocks, or other debris that could be thrown by the blades. Always wear appropriate personal protective equipment (PPE), including eye protection, hearing protection, sturdy shoes (not sandals), and close-fitting clothing. Loose clothing can get caught in moving parts, leading to dangerous situations. Furthermore, never operate the mower under the influence of alcohol or drugs.
Before each use, conduct a thorough inspection of your John Deere Z355E. Verify that all guards, shields, and safety interlocks are in place and functioning correctly. Inspect the blades for damage, wear, or sharpness. Dull or damaged blades can increase the risk of thrown objects and compromise the quality of the cut. Check the tire pressure to ensure it is within the recommended range. Uneven tire pressure can affect stability and control, especially on uneven terrain.
Also, examine the engine oil and fuel levels. Operating the mower with low oil can cause severe engine damage. Ensure the fuel cap is securely tightened to prevent spills and potential fire hazards. Look for any signs of leaks – oil, fuel, or hydraulic fluid – and address them immediately before operation. Test the brakes to ensure they are functioning properly. Defective brakes can lead to loss of control, particularly when operating on slopes.
Operating a zero-turn mower on slopes requires extra caution. The John Deere Z355E, like other zero-turn mowers, can be more prone to tipping on inclines than traditional lawn tractors. Avoid mowing on slopes steeper than the manufacturer's recommendations, which are clearly outlined in the operator's manual. Always mow up and down slopes, never across. Mowing across a slope increases the risk of sideways tipping.
Reduce your speed when operating on slopes and avoid sudden starts, stops, or turns. These maneuvers can destabilize the mower. Be extra careful when changing direction on a slope. Gradually ease into turns and avoid jerky movements. Pay close attention to the terrain and watch out for holes, bumps, or other obstacles that could cause the mower to become unstable. If you feel the mower starting to tip, immediately steer downhill.
Proper maintenance is crucial for the safe and reliable operation of your John Deere Z355E. Always disconnect the spark plug wire before performing any maintenance or repairs. This prevents accidental starting, which could result in serious injury. Never work under the mower without using proper support stands. Jacks alone are not sufficient and can fail, causing the mower to fall.
When working with fuel, be extra cautious. Fuel is highly flammable and can cause explosions. Always work in a well-ventilated area and keep open flames or sparks away. Dispose of used oil and fuel properly, according to local regulations. When sharpening blades, wear appropriate hand protection to prevent cuts. Ensure the blades are properly balanced after sharpening to prevent excessive vibration. Never modify the mower in any way that could compromise its safety features. Use only genuine John Deere parts for replacements.
Knowing how to quickly shut down the mower in an emergency is essential. Familiarize yourself with the location and operation of the engine stop switch or key. In an emergency, immediately disengage the blades and shut off the engine. If the mower is tipping, attempt to steer downhill while simultaneously shutting down the engine. If the mower is on fire, use a fire extinguisher rated for flammable liquids.
In the event of an accident, immediately stop the mower and assess the situation. Provide first aid to any injured persons and call for emergency assistance if needed. Report any accidents involving the mower to the appropriate authorities. Thoroughly inspect the mower for damage after any incident, even if it appears minor. Do not operate the mower until any damage has been repaired by a qualified technician.
Maintaining your John Deere Z355E in optimal condition requires a ready understanding of its key components and common replacement parts. Identifying these parts proactively will allow for faster repairs and minimize downtime. Typical replacements include air filters, oil filters, spark plugs, mower blades, drive belts, and tires. These items endure regular wear and tear depending on the intensity and frequency of usage, and replacing them at their recommended service intervals ensures smooth operation and extends the life of your mower. Consult your owner's manual for specific part numbers and service intervals tailored to your Z355E model. Regular inspection of these components is crucial for identifying potential issues before they escalate into more significant problems.
Beyond the regularly serviced items, other parts might require replacement over time due to damage or malfunction. These could include the battery, starter motor, fuel pump, various switches and sensors, and even parts of the mowing deck. The life of these components varies based on usage patterns and environmental conditions. For example, a mower used in dusty or abrasive conditions may require more frequent air filter changes. Similarly, a mower frequently exposed to dampness may require more attention to electrical connections and corrosion prevention. Familiarizing yourself with the location and function of these less frequently replaced parts can save you time and money in the long run.
The John Deere Z355E is a versatile machine, and a wide range of accessories are available to enhance its functionality and tailor it to your specific needs. When selecting accessories, it's critical to choose only those that are specifically approved by John Deere for use with your Z355E model. Using non-approved accessories can void your warranty and potentially damage your machine. Approved accessories have been rigorously tested and engineered to work seamlessly with your mower's systems, ensuring optimal performance and safety. Consult your local John Deere dealer or the official John Deere website for a comprehensive list of approved accessories.
Some of the most popular accessories for the Z355E include mulch kits, grass catchers, and tow-behind attachments such as carts or sprayers. Mulch kits recycle grass clippings back into the lawn as a natural fertilizer, promoting healthier turf and reducing the need for chemical fertilizers. Grass catchers provide a convenient way to collect grass clippings and leaves, resulting in a cleaner and more manicured lawn. Tow-behind attachments can expand the functionality of your Z355E beyond mowing, allowing you to use it for tasks such as hauling materials or applying herbicides. When installing and using these accessories, always follow the manufacturer's instructions carefully to ensure safe and proper operation.
Acquiring the correct parts and accessories for your John Deere Z355E is crucial for maintaining its performance and longevity. The most reliable source for genuine John Deere parts and approved accessories is your local John Deere dealer. They have the expertise and resources to help you identify the correct parts for your specific model and application. Furthermore, they can provide valuable advice on installation, maintenance, and troubleshooting. Building a relationship with your local dealer is a smart investment in the long-term health and performance of your Z355E.
In addition to your local dealer, you can also order parts and accessories online through the official John Deere website or authorized online retailers. When ordering online, be sure to double-check the part numbers and descriptions to ensure you are ordering the correct items. Utilizing the parts lookup tool on the John Deere website, which allows you to search by model number, serial number, or part name, is highly recommended. Always compare prices and shipping costs from different vendors before making a purchase. It's often beneficial to have a qualified technician install more complex parts to ensure proper fitment and functionality, especially those related to the engine or transmission.
Properly preparing your John Deere Z355E for extended storage, especially during the winter months, is crucial for ensuring its longevity and optimal performance in the spring. A little preventative maintenance now can save you considerable time and money on repairs later. Start by thoroughly cleaning the mower deck, removing any grass clippings, debris, or accumulated dirt. This not only prevents corrosion but also eliminates potential nesting sites for rodents. Inspect the mower deck for any signs of damage, such as dents or cracks, and address them before storage to prevent further deterioration.
Next, give your Z355E a complete wash. Using a garden hose and a mild detergent, carefully clean the entire mower, including the engine compartment. Avoid spraying water directly into the engine's air intake or electrical components. After washing, allow the mower to dry completely before proceeding with the next steps. A dry mower is much less susceptible to rust and corrosion during storage. Remember to pay special attention to the underside of the mower deck, as this area is particularly prone to accumulating moisture and debris.
The battery is a critical component of your John Deere Z355E, and proper storage is essential to prevent damage and maintain its charge. During prolonged storage, batteries can self-discharge, potentially leading to sulfation and reduced lifespan. To prevent this, remove the battery from the mower. Clean the battery terminals with a wire brush to remove any corrosion. Store the battery in a cool, dry place where temperatures remain consistently above freezing.
Consider using a battery maintainer or trickle charger to keep the battery fully charged during storage. These devices provide a low-level charge that prevents self-discharge and keeps the battery in optimal condition. If you don't have a battery maintainer, you can periodically check the battery voltage and recharge it as needed. Always follow the battery manufacturer's recommendations for charging and storage. Remember to disconnect the battery cables before removing the battery to prevent accidental short circuits.
Gasoline can degrade over time, forming varnish and gum deposits that can clog the fuel system and prevent your mower from starting in the spring. To prevent fuel-related issues, add a fuel stabilizer to the fuel tank before storing your John Deere Z355E. Follow the manufacturer's instructions for the correct amount of stabilizer to use. Run the engine for a few minutes after adding the stabilizer to ensure it circulates throughout the fuel system.
Alternatively, you can drain the fuel tank completely. This eliminates the risk of fuel degradation but requires careful disposal of the gasoline. Always dispose of gasoline properly, following local regulations. If you choose to drain the fuel tank, run the engine until it stalls to ensure that the carburetor and fuel lines are also emptied. After draining the fuel, consider spraying a fogging oil into the carburetor to further protect the engine's internal components from corrosion.
Protecting your John Deere Z355E from the elements during storage is vital to prevent rust, corrosion, and damage from weather exposure. Ideally, store your mower in a covered, dry location, such as a garage, shed, or storage unit. If indoor storage is not possible, cover the mower with a waterproof and breathable cover specifically designed for lawn mowers. This will protect it from rain, snow, sun, and other environmental factors.
Ensure that the storage area is well-ventilated to prevent the buildup of moisture, which can lead to rust and mold. If storing the mower outdoors, elevate it slightly off the ground using blocks of wood or a pallet to prevent moisture from wicking up from the ground. Regularly check the mower during storage to ensure that the cover remains in place and that there are no signs of moisture buildup or pest infestation. A little attention during storage can go a long way in preserving the condition of your John Deere Z355E for years to come.
Your John Deere Z355E comes with a limited warranty that protects you against defects in materials and workmanship. This warranty provides peace of mind, knowing that if a problem arises due to manufacturing flaws, John Deere will cover the cost of repairs or replacement parts, as specified in the warranty agreement. The exact duration and scope of the warranty can vary depending on your region and the specific terms outlined in your owner's manual, so it's crucial to familiarize yourself with these details. Remember, routine maintenance, wear and tear, and misuse are generally not covered, emphasizing the importance of proper care and operation.
The warranty period typically starts from the date of purchase, as indicated on your sales receipt or warranty registration. It's essential to retain these documents as proof of purchase, as they are required when making a warranty claim. The warranty covers specific components of the tractor, such as the engine, transmission, and electrical system, but may have limitations on certain parts like tires, belts, and blades, which are subject to normal wear. Understanding the specific parts covered and the duration of the warranty period is key to effectively utilizing your warranty benefits.
Should you experience a problem with your John Deere Z355E that you believe is covered under warranty, the first step is to contact your authorized John Deere dealer. They are equipped to diagnose the issue and determine if it falls within the scope of the warranty. Be prepared to provide your sales receipt, warranty registration, and a detailed description of the problem you are experiencing. The more information you can provide, the easier it will be for the dealer to assess the situation and initiate the warranty claim process.
After contacting your dealer, they will likely inspect the tractor to verify the defect and determine the cause. If the issue is deemed to be a warranty-covered repair, the dealer will proceed with the necessary repairs or replacement of parts. John Deere typically covers the cost of parts and labor for approved warranty claims. Remember to always use genuine John Deere parts for any repairs or maintenance, as using aftermarket parts can potentially void your warranty. The dealer will handle the communication with John Deere regarding the claim, ensuring a smooth and efficient resolution.
While the warranty provides valuable protection, it's essential to understand what it does not cover. As previously mentioned, normal wear and tear on components like tires, belts, blades, and filters are typically excluded. Damage resulting from misuse, neglect, improper storage, or failure to perform regular maintenance as outlined in the owner's manual will also void the warranty. It is important to adhere to the recommended maintenance schedule to ensure the longevity and reliability of your tractor and to maintain your warranty coverage.
Modifications or alterations made to the tractor without authorization from John Deere can also void the warranty. Similarly, damage caused by external factors such as accidents, fire, or natural disasters are not covered under warranty. Using non-approved attachments or implements can also lead to warranty exclusion. Therefore, always consult your authorized John Deere dealer or refer to the owner's manual before making any modifications or using any attachments with your Z355E. Understanding these exclusions will help you avoid potential issues and ensure that your warranty remains valid.
The John Deere Z355E is equipped with a powerful and reliable engine designed for optimal performance and longevity. Specifically, this model features a Briggs & Stratton Intek V-Twin engine. This engine is known for its smooth operation, consistent power output, and ease of maintenance, making it an ideal choice for demanding lawn care tasks. It delivers ample power to the cutting deck, ensuring a clean and even cut, even in thick grass. Furthermore, the V-Twin configuration reduces vibration, enhancing operator comfort during extended periods of use.
The engine's displacement is approximately 724cc, providing substantial torque for tackling challenging terrains and dense vegetation. The engine is also designed with an overhead valve (OHV) configuration, which improves combustion efficiency and reduces emissions. Lubrication is typically provided by a full-pressure system with an oil filter. This advanced lubrication system ensures that all critical engine components receive adequate lubrication, minimizing wear and extending the engine's lifespan. Always adhere to the manufacturer's recommended maintenance schedule, including regular oil changes, to ensure optimal engine performance and longevity.
The cutting width of the John Deere Z355E is a key factor in determining its efficiency in mowing larger areas. The mower features a 42-inch cutting deck, which allows for a wide swath to be cleared with each pass, significantly reducing mowing time. This deck size is ideal for homeowners with medium to large-sized lawns, providing a balance between maneuverability and cutting capacity. The stamped steel deck is designed for durability and consistent cutting performance and must be maintained to keep clean to eliminate clumping.
The cutting height is easily adjustable, allowing you to customize the grass length to your preference. The cutting height range typically spans from 1 inch to 4 inches, providing versatility for different grass types and desired aesthetic results. Adjusting the cutting height is generally achieved through a lever or dial system, allowing for quick and easy modifications without the need for tools. Regular cleaning and maintenance of the cutting deck, including sharpening or replacing the blades, are essential to ensure optimal cutting performance and prevent uneven cuts.
The fuel capacity of the John Deere Z355E is designed to provide ample runtime, allowing you to complete your mowing tasks without frequent refueling. The fuel tank typically holds around 3 gallons of gasoline. This capacity is sufficient for mowing most residential lawns without requiring interruptions for refueling. Check fuel lines, and fuel filters to keep free and clear from obstruction.
Using fresh, clean gasoline is crucial for optimal engine performance and longevity. It's recommended to use gasoline with an octane rating of 87 or higher. Adding a fuel stabilizer, especially when storing the mower for extended periods, can help prevent fuel degradation and ensure easy starting when you're ready to use the mower again. Always fill the fuel tank in a well-ventilated area and avoid overfilling, as this can lead to fuel spills and potential fire hazards.
Understanding the dimensions and weight of the John Deere Z355E is important for transportation, storage, and maneuvering around your property. The overall length of the mower is approximately 75 inches, while the width is around 51 inches with the discharge chute deployed. The height to the top of the seat is roughly 45 inches. These dimensions should be considered when determining storage space requirements in your garage or shed.
The weight of the John Deere Z355E is approximately 500 pounds, depending on the specific configuration and optional accessories. This weight provides stability and traction, especially on uneven terrain. However, it's also important to consider the weight when transporting the mower on a trailer or using it on sensitive surfaces, such as soft lawns or driveways. Always consult the manufacturer's specifications for the exact dimensions and weight of your specific model to ensure accurate information.