Skip to content

humber logo

Industrial Electrician Apprenticeship


Ontario College Certificate


Program Code: 06621

Length: 8 & 10 weeks starting in September

In Humber’s Industrial Electrician Apprenticeship program, you will learn technical theory and skills in the three levels of in-school training allocated toward your apprenticeship. You will learn to perform a wide range of tasks including lay out, assemble, install, repair, maintain, connect and test electrical fixtures, apparatus, control equipment and wiring for electrical systems; plan installations from blueprints, sketches and specifications and install all electronic devices; systematically diagnose faults in electrical and electronic systems and equipment, and repair or replace electrical and electronic components; measure, cut, thread, bend, assemble and install conduits and other electrical conductor enclosures; splice and terminate electrical conductors; test electrical and electronic equipment for proper function; and program and troubleshoot PLC and fire alarm systems.

Apprenticeships are not available to international applicants.

Admission Requirements

Applicants must meet all the requirements below in order to meet minimum program eligibility. Meeting minimum eligibility requirements does not guarantee an offer of admission. Admission decisions will be available via MyHumber, or by email and mail. Admission decisions will not be released by phone.

Admission selection is based on the following requirements:

  • .

    Academic

    This apprenticeship is regulated by the Ontario College of Trades. You and your employer are required to register through your local Apprenticeship Branch Office of the Ministry of Labour, Training and Skills Development (MLTSD).

    You will be scheduled for the in-school portion of training by MLTSD. Apprentices who have been scheduled for the in-school training will be sent an Offer of Classroom Training letter from the MLTSD. For more information, visit ontario.ca/page/start-apprenticeship.

    Required Preparation

    • Grade 12

    For Peel Region, please contact:
    MLTSD – Apprenticeship Branch
    The Emerald Centre
    10 Kingsbridge Garden Circle, Suite 404
    Mississauga, ON  L5R 3K6
    905.279.7333 or 800.736.7332
    ontario.ca/page/employment-ontario

    Mature Applicants

    Diplomas and Certificates

    An applicant is considered a mature applicant if they have not completed secondary school or other postsecondary school, and will be 19 or older as of the first day of classes. Humber will invite you for testing to demonstrate that you meet all listed course requirements.

    Degrees

    An applicant is considered a mature applicant if they have not completed secondary school or attended postsecondary studies, and will be 21 or older as of the first day of classes. Mature applicants for degree programs will be required to meet course requirements at the U/M level or equivalent.

    College Transfer Applicants

    Diplomas and Certificates

    An applicant is considered a college transfer applicant if they have completed some or all of a college-level credential. Humber may use a combination of secondary school and/or college courses and grades to determine program eligibility.

    Degrees

    An applicant is considered a college transfer applicant if they have completed some or all of a college-level credential. Humber may use a combination of secondary school and/or college courses and grades to determine program eligibility. Applicants must have an overall minimum grade point average (GPA) of 65 per cent in the program. Applicants are required to disclose and provide academic transcripts for all course work completed at the postsecondary level.

    University Transfer Applicants

    Diplomas and Certificates

    An applicant is considered a university transfer applicant if they have completed some or all of a university-level credential. Humber may use a combination of secondary school and/or university courses and grades to determine program eligibility.

    Degrees

    An applicant is considered a university transfer applicant if they have completed some or all of a university-level credential. Humber may use a combination of secondary school and/or university courses and grades to determine program eligibility. Applicants are required to disclose and provide academic transcripts for all course work completed at the postsecondary level.

How to Become an Apprentice

Visit www.ontario.ca/page/start-apprenticeship for instructions.

Equipment & Device Requirements

Details and Specifications Minimum Specs Recommended Specs
Processor Intel i7 (Quad core) Intel i7 (Quad core or higher)
Memory Minimum 16 GB of RAM
Storage Minimum 16 GB of RAM, Wireless 802.11 b/g/n/ac
Other Built-in Ethernet port (strongly recommended), Long battery life (strongly recommended)

Additional Costs

$50 - lab fee. There may also be additional fees for personal protective equipment (PPE) and equipment that is required and utilized within the lab.

Pathways

Humber offers a number of transfer options and pathway opportunities. Visit humber.ca/transferoptions or refer to the program page.

Contact Information

Program assistant
Faculty of Applied Sciences & Technology
416.675.6622 ext. 78038
apprenticeship@humber.ca

Admissions Questions

Domestic Students

416-675-5000
enquiry@humber.ca

Every attempt is made to ensure that information contained on this website is current and accurate. Humber reserves the right to correct any error or omission, modify or cancel any course, program, fee, timetable or campus location at any time without prior notice or liability to users or any other Person.

On October 21, 2019, the Provincial Government of Ontario announced the renaming of the Ministry of Training, Colleges and Universities (MTCU) to the Ministry of Colleges and Universities (MCU). Both names may appear on this website.

Select information only is included in this printable PDF. For complete program details, refer to humber.ca/programs.

Print/Download Date: December 4, 2022